Product Information

【Tank capacity】
2.5 L
【Material】
Stainless steel
【Lever cock】
For residual spray: New lever cock
For foam spray: PP lever cock
【Hose】
1.5 m (oil-resistant hose)
【Nozzle】
For residual spray: Bent pipe (350 mm) + 1 flexible nozzle
For foam spray: Bent pipe (490 mm) + nozzle for foam spraying (fan-shaped)

・ Short nozzle for foam spraying (350 mm short nozzle for foam spraying. Spray with fan-shaped foam.)
・ Long nozzle for residual spray (490 mm long nozzle for residual spray)
・ Crevice nozzle for spraying foam (sprays fine foam. Can be used in areas where liquid agents are unable to reach, such as behind counter fridges or confined spaces under sinks.)
・ Straight nozzle for spraying foam (sprays foam in a straight line. Ideal for applying foam to pipes or spraying foam long distances.)
・ Compressor 3L-US (with 10 m hose) (Compact, quiet, oil-free compressor. Pressure control valve allows pressure to be adjusted between 0 and 4.0 kgf/cm2. *Continuous operating time up to 20 minutes.)

Enables residual spraying and foam spraying with a single unit.
Foam spray: Foam can be sprayed into areas where residual spray is unable to reach, allowing the active ingredient to remain effective. In addition, an IGR agent is used to control drain flies, with the effect sustained by spraying foam into crevices and cracks in drainage pits, grease traps, etc.
Residual spray: Uses a mini flexible nozzle (cone type). Can easily fit into narrow crevices. The tip can be switched as needed. The spray pattern can be adjusted between a straight line and a circle by millimeter increments. The nozzle can also be switched to an optional long nozzle, or by only changing the tip nozzle.
Can be connected to a compressor for spraying at a constant pressure.